Smooth, crisp and refined sound without sacrificing effortless bass and jaw-dropping impact. Prime Pinnacle speakers render the finest musical details with breathtaking clarity and deliver massive cinematic dynamics to bring thrilling and immersive sound within everyone’s reach.

All-new driver array features first-ever 5.25-inch midrange and triple woofer design with 1-inch aluminum dome tweeter for revealing highs with deep, room-energizing bass and crisp dynamics at all listening levels. SoundMatch 3-way crossover maintains pinpoint accuracy and silky-smooth transitions with expansive soundstage and precise imaging for largest “sweet spot” possible.

 

Quick Specs:

  • Frequency Response / Acoustic Data: 

  •  Rated bandwidth: 29 Hz-25 kHz (±3 dB) 
  •  Nominal impedance: 8 ohms 
  •  Sensitivity: 88 dB (2.83V @ 1 meter full-space, 300-3kHz) 
  •  Recommended amplifier power: 20-300 watts 
  • Speaker Specs: 

  • Floor Standing Tower Loudspeaker
  • Black ash and piano gloss black finish options
  • 5-way binding posts
  • Triple 2” wide-flared rear-firing ports 
  • Cloth grille with pin/cup retention system 
  • Cabinet Dimensions: 40.5" (H) X 8" (W) X 13.4" (D)
  • Overall Dimensions: 41.1" (H) X 8" (W) X 13.9" (D) (includes grille, feet and binding posts)
  • Shipped Dimensions: 46.5" (H) X 14.8" (W) X 19" (D)
  • Weight Packaged: 66 lbs (29.9 kg)
  • Weight Unboxed: 57.1 lbs (25.9 kg)

    Driver Specs: 
  • 1” Aluminum Dome Tweeter: 

  • FEA-optimized diffuser for airy and unveiled presentation
  • Aluminum dome for exceptional transient response
  • Triple 6.5” Woofers: 

  • Long stroke motor and suspension for high output
  • Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior
  • Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
  • Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
  • Vented voice coil former minimizes air compression artifacts
  • 5.25” Midrange Driver: 

  • Composite glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and pistonic behavior beyond pass band
  • Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
  • Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer
  • Vented voice coil former minimizes air compression artifacts
  • Crossover & Cabinet Specs: 

    Crossover: 

  • 3-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards
  • 2-piece PCB design reduces component interference
  • Tweeter-to-Midrange crossover: 2.1kHz (12 dB/octave slopes)
  • Midrange-to-Woofer crossover frequency: 300Hz (12 dB/octave slopes)
  • Cabinet: 

  • Separate sealed midrange enclosure with angled bracing diffuses and shifts standing waves beyond the driver pass band, improving sound quality 
  • Three separate woofer enclosures with optimized port tuning frequencies for smooth and accurate bass response 
  • Acoustically transparent and FEA optimized grilles minimize diffraction 
  • Chamfered front baffle and flush-mounted drivers reduce edge diffraction and improved on-axis high frequency response
  • FEA-optimized cabinet and angled bracing eliminates resonances and improves cabinet rigidity for acoustically inert enclosure

Prime Pinnacle Speaker

$1,599.00Price
Finish
  • Frequency Response / Acoustic Data:

    •  15-280 Hz +/- 3 dB (standard mode – all ports open)
    •  13-280 Hz +/- 3 dB (extended mode – 2 ports open)
    •  14-360 Hz +/- 3 dB (sealed mode – all ports sealed)
    •  2-meter ground plane away from reflective structures (quasi-anechoic).
    •  Roll-off slope specifically optimized to take maximum advantage of available room gain

     

    Subwoofer Specs:

    • Black Oak and Piano Gloss Black finish options
    • Protective non-resonant steel mesh grille
    • Front-firing 16" driver
    • Rear-mounted amplifier
    • Triple front-firing flared high-flow ports
    • Screw-in rubber feet
    • Robust Medium Density Fiberboard(MDF) cabinet construction
    • Cabinet Dimensions: 25" (H) x 21.7" (W) x 28.3" (D) (without grille)
    • Cabinet Dimensions (with grille): 25” (H) X 21.7” (W) X 30.9” (D)
    • Shipped Dimensions: 34.2" H X 27.5" W X 38.6" D
    • Weight (unboxed): 174.5 lbs
    • Shipped Weight: 207.3 lbs

     

    Driver Specs:

    • SVS 16” Ultra-series driver
    • Powder-coated cast aluminum basket
    • Four high-grade ferrite magnets
    • Finite Element Analysis (FEA)-optimized motor structure
    • Dual shorting rings reduce gap induction and lower distortion
    • Extended pole piece improves heat sink and thermal management properties
    • 8” diameter, high-power edge wound voice coil
    • 95mm peak to peak Xmech excursion (82mm Xmax)
    • Upgraded Nomex spider for improved linearity and driver control at extreme drive levels
    • Dual 24-strand copper and Nomex composite high-temperature leads provide a pristine electrical connection from the amplifier to the voice coil
    • Premium glass fiber laminated dustcap and reinforced composite cone sub-structure ensure a light, ridged, and neutral radiating surface
    • Low-creep rubber long-throw surround for excellent durability and longevity

     

    Amplifier Specs:

    • Sledge STA-1500D DSP amplifier
    • 1,500 watts RMS continuous (5,000+ watts peak dynamic)
    • Efficient and cool-running Class D topology
    • High resolution 50Mhz Analog Devices Audio DSP with double precision 56bit filtering is most advanced subwoofer processor available for perfect audio reproduction
    • Active PFC (Power Factor Correction) ensures the cleanest 1500W output regardless of your home mains supply
    • XLR and RCA stereo input/output with ultra-wide input voltage for consumer and professional audio applications
    • Convenient front-mounted display with subwoofer controls and 8 digit LED display
    • Groundbreaking Subwoofer Control and Bass Management Smartphone App for Apple and Android Devices
    • IR Remote Control
    • Three user adjustable parametric EQs
    • Continuously variable volume/gain control
    • Continuously variable (0-180 degrees) phase control
    • Continuously variable (30-200 Hz) 6, 12, 18, or 24 dB/octave low pass filter frequency with disable/LFE setting
    • Main power rocker switch
    • Auto-On / On / Trigger Controls
    • 3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input
    • Green standby mode with > 0.5 watts consumption
    • Input impedance 22kohm (RCA)/ 22kohm (XLR).
    • RoHS compliant, lead-free construction and world-wide safety certifications
    • Detachable power cord

ABOUT US

Since 2010, KMR has been creating custom media rooms, home theaters and home automation systems for our customers. Our goal is to provide the best user-friendly systems so our customers can enjoy their homes.

KMR HOME AUTOMATION & THEATERS

27502 Frazier Rock Ct
Fulshear TX 77441
281-780-9383 | info@kmrav.com

CREATED BY BECAUSE MARKETING